메뉴 건너뛰기

SAP 한국 커뮤니티

Abap Dump Top 10

양키 2013.01.14 17:26 조회 수 : 15732

Abap에서 주로 발생하는 Dump 상위 10가지 유형입니다.

영어지만 대충 보시면 아실듯 합니다.

 

 

1) STORAGE_PARAMETERS_WRONG_SET

The problems with the dump STORAGE_PARAMETERS_WRONG_SET are mainly related to the general restrictions of the 32bit OS. You can address up to 4GB of virtual memory. Each process in OS is running in its own context and can address max. 4GB. The parameters which are related to ‘heap memory’ ie abap/heap_area_dia, abap/heap_area_nondia, abap/heap_area_total are should be set to 2 GB. Common approaches which we can take for this dump are:

a) Please use in the ‘boot.ini’ file the switch ‘/3GB’ and restart your whole computer as described in the below SAP Notes:

SAP Note 552209 – Maximum memory utilization for processes on NT/Win 2000
SAP Note 313347 – Windows NT, 2000, 2003: Editions and memory usage.

b) Another way to avoid this problem is to try to add more criteria to your report/program/transaction so that there will be fewer entries that need to be retrieved from your database or buffers. This way, the system would not need to use up much resource to complete the transaction. The query may have been quite big already and the load cannot be accommodated. So please do add more criteria or options so that there will less data to fetch.

c) To decrease the value of the parameters: rdisp/ROLL_SHM, rdisp/PG_SHM
d) Migrate to 64-bit OS (as per SAP Note 931024 and SAP Note 996600)

2) TSV_TNEW_PAGE_ALLOC_FAILED

The error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested by the system because the program needed to expand an internal table, but not is available. When Extended Memory is completely used up, the process will go into PRIV mode and it will starts using Heap Memory in case of Windows or vice versa in case of Unix. Once this enters into PRIV mode, no other user will be able to use the corresponding work process. If there is enough memory for it to finish, you will not see the error.

Please refer the following SAP notes:

SAP Note 649327 – Analysis of memory consumption.
SAP Note 20527 - Runtime error TSV_TNEW_PAGE_ALLOC_FAILED
SAP Note 185185 – Application: Analysis of memory bottlenecks
SAP Note 369726 - TSV_TNEW_PAGE_ALLOC_FAILED

3) TSV_TNEW_OCCURS_NO_ROLL_MEMORY

The dump TSV_TNEW_BLOCKS_NO_ROLL_MEMORY usually means that the roll buffer has been exhausted. Please check the usage of your roll buffer with ST02->History->Page. Near the bottom of the screen you can see ROLL BUFFER history. If the roll buffer has been exhausted, you can increase the size with parameter rdisp/ROLL_MAXFS, but make sure you have sufficient disk space to handle the additional size of this buffer if it writes to disk.

Please refer the following SAP note:

SAP Note 185185 - Application: Analysis of memory bottlenecks

4) LOAD_PROGRAM_LOST

The LOAD_PROGRAM_LOST error can occur when there are two or more versions of a given program loaded into the buffer at any given time. This happens when the program is changed by one user while it is still in use by another user. When a user gets to the program that is having this problem and R/3 attempts to load the generated version from the buffer, it sees that the version is not the most current and tries to swap it out for the most current, but the load was lost from the PXA buffer, hence it throws the dump of LOAD_PROGRAM_LOST. LOAD_PROGRAM_LOST are the result of the combination of not enough PXA space + changes of programs which are in use currently. A running program can’t run with two different versions of one program. Ask the users restart their transactions (/nST22). By the way, if the PXA would be big enough then the user who does not leave their transaction for weeks will not see the changes to this application until they restart the transaction.

Other way to correct the error is you need to run transaction SAMT & regenerate the program(s) that are listed in the dump. You can then do a $SYNC in the command field in the affected application server, but make sure that the other application servers are not running at that time. After the $SYNC, the other app servers can be brought up and the buffers should then be in sync.

Please refer the following SAP notes:

SAP Note 5451 – LOAD_PROGRAM_LOST
SAP Note 24824 – Inconsistencies in a Program Load
SAP Note 10367 – Termination LOAD_PROGRAM_LOST

5) CALL_FUNCTION_SIGNON_INCOMPL

The short dump CALL_FUNCTION_SIGNON_INCOMPL is typical of an RFC-Call with incorrect or missing logon-data. So, we have to find out where the call is coming from.

Please refer the following SAP notes:

SAP Note 171805 - Determining RFC client when sign-on problems occur.
SAP Note 684788 - Possible reason for CALL_FUNCTION_SIGNON_INCOMPL.
SAP Note 901256 – Rabax “CALL_FUNCTION_SIGNON_INCOMPL”.

6) RFC_NO_AUTHORITY

This error mostly appears with the user SAPSYS. The user SAPSYS is an internal user, it is not a personally used ID in the R/3 system. However, all system errors and ABAP programs are run via this user id. As per note 93254, since release 4.0 the parameter auth/rfc_authority_check is set on 1 per default. This means, as long as you did not set it explicitly to value ‘0′, any incoming RFC call is checked as described in the mentioned note.

The common approaches which we can take on this dump are:

1. Deactivate RFC authority Check: set auth/rfc_authority_check to value ’0′ (zero) in your profile and restart the server. (This is the least secure option as any authorization checks are disabled for all RFC requests).

.
2. Assign full RFC authorities to the users who need to connect to your system via RFC.
Please also check the user id provided in RFC connection (check from SM59) which cause the dump RFC_NO_AUTHORITY. Make sure that this user has sufficient authorizations.

Please refer the following SAP notes:

SAP Note 171805 – Determining RFC client when sign-on problems
SAP Note 93254 - RFC short dump RFC_NO_AUTHORITY
SAP Note 91980 – Missing output of RFC short dump after login errors

7) SYSTEM_NO_TASK_STORAGE

For this error, please go to service market to download the latest patch for your SAP Application release and apply the patch. The latest patch would be useful for the problem. The SYSTEM_NO_TASK_STORAGE is a known problem and related to limitation of 32bit OS. Please see notes 110172, 552209, 546361 for details. As long term solution you have to use 64bit Windows (Note 996600).The cause for the dump SYSTEM_NO_TASK_STORAGE could also be an old sap collector. SAP recommends using the updated collector version always.

The common approaches which we can take on this dump are:

1. Check your settings match the recommendations mentioned in SAP Note 146289.
2. Are ulimits set according to SAP Note 323816? (Referenced in SAP Note 146289)
3. If there is no additional instances on same host then it should be possible to increase EM/TOTAL_SIZE_MB from 4096 MB towards the RAM and even higher so that ztta/roll_extension can be reached. Also the swap space should be set according to SAP Note 153641 for this.

Please refer the following SAP notes:

SAP note 789477 – Large extended memory on AIX (64-bit) as of Kernel
SAP note 191801 - AIX 64-bit with a lot of Extended Memory
SAP note 445533 - Lots of extended memory on AIX (64-bit)
SAP note 581319 - Signal 33 on AIX (64-bit only)
SAP note 153641 – Swap space requirement for R/3 64-bit kernel

8) CALL_FUNCTION_NOT_FOUND

The error CALL_FUNCTION_NOT_FOUND is due to the fact that the program called the function which doesn’t exist in the library. Means the requested function module is not found in table TFDIR. Also you may get this error if the buffered version of the TFDIR contains errors. The error needs to attention based on the function module. You may take a general approach mentioned in the SAP Note 98458.

Please refer the following SAP note:

SAP Note 98458 - SAPMSSY1, CALL_FUNCTION_NOT_FOUND

9) CALL_FUNCTION_SINGLE_LOGIN_REJ

This error usually comes when you don’t have sufficient authorization to login to the trusted system. This dump accompanies with 4 different error codes:

0 – Incorrect logon data for valid security ID.
1 – Calling system is not a Trusted Systemor security ID is invalid.
2 – Either user does not have RFC authorization (authorization object S_RFCACL), or a logon was performed using one of the protected users DDIC or SAP*.
3 – Time stamp of the logon data is invalid.

Please refer the following SAP notes:

Note 986707 – No authorization to log on as a trusted system (RC=1)

SAP Note 128447 – Trusted/Trusting Systems
SAP Note 204039 – Authorization check in trusted system

10) SYSTEM_CORE_DUMPED

Generally, SYSTEM_CORE_DUMPED is related to R/3 system kernel. Upgrade the kernel patch to the latest may solve the issue. But without a detail analysis of the coredump at the Kernel, we cannot conclude the reason behind the dump. I would recommend contacting SAP for this dump.

SAP Note 19466 – Downloading SAP kernel patches

Ref : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/20344

번호 제목 글쓴이 날짜 조회 수
547 ABAP TUNNING sapjoy 2012.03.12 234716
546 New function vs Old function(obsolete) sapjoy 2014.03.31 127312
545 테이블Active시 (Warnings Occurred During Activation) 안나오게하는방법 [6] 양키 2012.03.29 99680
544 자주 사용하는 String 조작 명령어 [7] 양키(이경환) 2015.01.13 34259
543 collect 구문 [4] sapjoy 2006.12.03 27016
542 사용자 패스워드 변경 함수, 창 [11] sapjoy 2009.12.21 25672
541 R/3 용어 정의 Definitions [4] sapjoy 2007.01.23 23898
540 BAPI_PR_CREATE 구매요청 생성시에 사용하세요 [2] 노름마치 2007.12.10 23690
539 SELECT statement D.Y.Kim 2007.07.20 23644
538 문자열에 있는 값이 숫자만으로 되어있는지 문자가 포함됐는지 체크하는 함수 [3] 꿀단지 2011.10.11 19821
537 LIKE와 TYPE의 차이 [13] sapjoy 2006.12.06 19674
536 숫자입력 체크(Numeric character check) [1] 양키(이경환) 2014.01.28 19488
535 SDN -> SCN 변경되면서 Contents별로 바뀐 LINK 모음 [13] Wise 멘토 2012.07.06 19045
534 ABAP 핵심정리 [23] SARA 2007.03.14 17321
533 ALV LIST 진행시 LAYOUT 속성값 [18] kwon09 2007.04.11 17221
532 ABAP 구문 총정리 [39] file Wise 멘토 2008.11.24 17128
531 FOR ALL ENTRIES IN 구문 사용시 select 필드 선택시 주의사항. [7] 나침반친구 2007.03.13 16908
530 인터널 테이블 라인수 lines [8] sapjoy 2014.01.20 16905
529 SYST 시스템 변수 정리 [5] 아밥뽀 2014.08.23 16793
528 data [2] sapjoy 2006.12.03 16675